Molecular Tumor Board CUP Characterization - Definitions - Onconova Implementation Guide v0.2.0

Is Modifier false

Summary false

Alternate Names extensions, user content

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

4. Extension.extension:conducted

Slice Name conducted

Definition

An Extension

Short CUP characterization conductedAdditional content defined by implementations

Control 10..1*

Is Modifier false

Must Support true

Obligations

Obligations

Actor

SHALL:populate

SHOULD:persist

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

6. Extension.extension:conducted.extension

Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short ExtensionAdditional content defined by implementations

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control 0..0*

Is Modifier false

Summary false

Alternate Names extensions, user content

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

8. Extension.extension:conducted.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

Fixed Value conducted

10. Extension.extension:conducted.value[x]

Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short Value of extension

Control 0..1

Type boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

12. Extension.extension:success

Slice Name success

Definition

An Extension

Short CUP characterization successfulAdditional content defined by implementations

Control 0..1*

Is Modifier false

Must Support true

Obligations

Obligations

Actor

SHALL:populate-if-known

SHOULD:persist

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

14. Extension.extension:success.extension

Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short ExtensionAdditional content defined by implementations

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control 0..0*

Is Modifier false

Summary false

Alternate Names extensions, user content

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Extension.extension:success.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

Fixed Value success

18. Extension.extension:success.value[x]

Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short Value of extension

Control 0..1

Type boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

20. Extension.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

Fixed Value http://onconova.github.io/fhir/StructureDefinition/onconova-ext-molecular-tumor-board-cup-characterization

22. Extension.value[x]

Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short Value of extension

Control 0..01

Type Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension

Definition

A characterization of the tumor board review focused on cancer of unknown primary (CUP) origin.

Short Molecular Tumor Board CUP Characterization

2. Extension.extension

Control 1..?

4. Extension.extension:conducted

Slice Name conducted

Short CUP characterization conducted

Control 1..1

Must Support true

Obligations

Obligations

Actor

SHALL:populate

SHOULD:persist

6. Extension.extension:conducted.extension

Control 0..0

8. Extension.extension:conducted.url

Fixed Value conducted

10. Extension.extension:conducted.value[x]

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Primitive Value This primitive element may be present, or absent, or replaced by an extension

12. Extension.extension:success

Slice Name success

Short CUP characterization successful

Control 0..1

Must Support true

Obligations

Obligations

Actor

SHALL:populate-if-known

SHOULD:persist

14. Extension.extension:success.extension

Control 0..0

16. Extension.extension:success.url

Fixed Value success

18. Extension.extension:success.value[x]

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Primitive Value This primitive element may be present, or absent, or replaced by an extension

20. Extension.url

Fixed Value http://onconova.github.io/fhir/StructureDefinition/onconova-ext-molecular-tumor-board-cup-characterization

22. Extension.value[x]

Control 0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension

Definition

A characterization of the tumor board review focused on cancer of unknown primary (CUP) origin.

Short Molecular Tumor Board CUP Characterization

Control 0..*
This element is affected by the following invariants: ele-1

Is Modifier false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

2. Extension.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

string

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

4. Extension.extension

Definition

An Extension

Short Extension

Control 1..*

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

6. Extension.extension:conducted

Slice Name conducted

Definition

An Extension

Short CUP characterization conducted

Control 1..1

Is Modifier false

Must Support true

Obligations

Obligations

Actor

SHALL:populate

SHOULD:persist

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

8. Extension.extension:conducted.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

string

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

10. Extension.extension:conducted.extension

Definition

An Extension

Short Extension

Control 0..0

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

12. Extension.extension:conducted.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

Fixed Value conducted

14. Extension.extension:conducted.value[x]

Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short Value of extension

Control 0..1

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

16. Extension.extension:success

Slice Name success

Definition

An Extension

Short CUP characterization successful

Control 0..1

Is Modifier false

Must Support true

Obligations

Obligations

Actor

SHALL:populate-if-known

SHOULD:persist

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

18. Extension.extension:success.id

Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short Unique id for inter-element referencing

Control 0..1

string

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

20. Extension.extension:success.extension

Definition

An Extension

Short Extension

Control 0..0

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

22. Extension.extension:success.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1

Is Modifier false

XML Format In the XML format, this property is represented as an attribute.

Summary false

Fixed Value success

24. Extension.extension:success.value[x]

Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short Value of extension

Control 0..1

[x] Note SeeChoice of Data Typesfor further information about how to use [x]

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

26. Extension.url

Definition

Source of the definition for the extension code - a logical name or a URL.

Short identifies the meaning of the extension

Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control 1..1